Engineering Tools

Gunsmithing Services and Costs

Firearms for repair and/or modification to be mailed to:


Precision Firearms LLC

82 Fellwood Dr.

Rincon, GA 31326

Please remove any accessories not necessary for repair and/or modification before sending your firearm in. Precision Firearms will not be held liable for customer modifications made to the firearm or accessories attached to the firearm that are not factory installed. Call before shipping your firearm to open a ticket and obtain a repair service number. Please package your firearm appropriately and follow all local and federal laws and ordinances when shipping a firearm. Return shipping fees will be charged at $25 for handguns and $30 for longguns to lower 48 only. Additional fees may apply.

For malfunction diagnosis, a magazine and ammunition must be provided. If no ammunition is provided, a box will be added to the bill.

PLEASE NOTE: AMMUNITION CANNOT BE SHIPPED IN THE SAME BOX AS THE FIREARM.

Gunsmithing Hourly

$80 Per Hour with a $40 Minimum
$100 Per Hour Machine & Labor

Additional Fees

$5.95 Shop Fee (Lubricant, Cleaner, Shop Materials, etc.)
$15 Expedite Fee
$15 Admin Fee for parts ordering
$10 Research Fee for hard-to-find parts

Standard Services

$40 Scope Mount (Free if purchased from Precision Firearms)

$40 Most Handgun Sight Removal & Installation (Free if purchased from Precision Firearms) ***1911 Sight Fitting Subject to hourly rate***

$40 field Strip and Clean*

$100 Detail Strip and Clean Handgun*

$120 Detail Strip and Clean Longgun*

$80 Remove LIVE round (Longgun)

$40 Remove LIVE round (Handgun)

$60 Remove Stuck Casing (Really stubborn stuck casing that requires reaming or other extreme methods subject to hourly rate)

$100 Barrel Cut and Re-Crown (handgun/rifle)

$40 Shotgun Barrel Cut and Square (Does not include moving front sight)

$120 Barrel Threading

       1/2-28 threads must have a minimum diameter of .575” at the muzzle

       9/16-24 threads must have a minimum diameter of .640" at the muzzle

       5/8-24 threads must have a minimum diameter of .700” at the muzzle

       3/4-20, 24 or 28 threads must have a minimum diameter of .850" at the muzzle

$50 Basic Glock Trigger Job

$100 (+ Parts) Glock Competition Trigger Job

$80 1911 Throating and Feed Ramp Polish

$100 (+ Parts) Basic 1911 Trigger Job (4-5 lb Pull Weight)

       Fit and Install Wilson Combat hammer, sear and sear spring, Straighten trigger bow, Adjust over-travel, Stone / Polish all parts.

$150 (+ Parts) Competition 1911 Trigger Job (3-3.5 lb Pull Weight)

       Fit and Install Ed-Brown Trigger with over-travel stop, Fit and Install Cylinder & Slide hammer, sear, disconnector, sear spring and main spring.

*All Cleaning Services include inspection, we will then make recommendations for replacement of necessary parts.

Add On Services

$20 Drill and Tap Per hole
$20 Laser Boresighting

Cerakote

Pistol Single Color

          $80 Assembly / Disassembly

          $200 Complete Handgun

          $100 Slide / Barrel

          $30-$35 ea Controls

          $20 Baseplate

          $25 Trigger

Revolver Single Color

          $80 Assembly / Disassembly

          $200 Complete Revolver

          $100 Frame / Barrel

          $75 Cylinder

          $60 Controls

          $50 Small Parts

AR / AK / Black Gun Single Color

$80 Assembly / Disassembly

$350+ Complete Firearm

$80 Upper Receiver

$80 Lower Receiver

$100 Handguard

$200 Upper / Lower / Handguard

$60 Lower Parts Kit

$60 Upper Parts Kit

$75 Barrel

$25 Magazine

$45 Butt Stock

$60 Buffer Tube

$45+ Brace

$120 - $250 Furniture Set

$25 - $45 Muzzle Device

$40 Gas Block and Tube

 

*We do not Cerakote BCG's here.

Bolt Gun Single Color

          $80 Assembly / Disassembly

          $280 Complete Rifle

          $110 Stock

          $200 Barrel & Action

          $75 Bolt

          $30 Magazine

Shotgun Single Color

          $80 Assembly / Disassembly

          $280 Complete Shotgun

          $110 Stock / Forend

          $200 Barrel & Action

          $75 Bolt

          $75 Barrel

Accessories Single Color

          $60 Scope Mount

          $100 - $250 Bipod

- Add $40 per additional color. specific patterns or designs will be quoted on a case by case basis.

- Cerakote does not fill pitting in metal

- Any loose parts shipped to Precision Firearms for Cerakoting must be accompanied by an inventory list.

- Additional charges may apply if extra polishing or blasting is needed due to pitting or rust.

- Precision Firearms will not Cerakote optics or electronic parts.

  • Facebook
  • Instagram
  • YouTube

(912) 289-7631

©2020 by Precision Firearms LLC. Proudly created with Wix.com